Chapter 2 - Preparations This chapter explains the preparations required before using the copier. Maintenance For safety of the service personnel, follow the maintenance instructions in the other section of this manual. Image Quality Selection The Image Quality can be selected to match the type of original to be copied. Label3 Label2 High voltage generated in this High temperature inside this section. Reference Symptom Items to Check Corrective Procedure Page Nothing displays on Check to make sure the copier is Plug the copier power cord into —. When the size of the original document is B4R or Folio, choose B4 R to copy it on B4R size or Folio R to copy it on Folio size. The display will blink and the copier will return to the state where copying can be continued.
Change the zoom percentage displayed using The percentage can also be input using the numeric keys. This type of situation presents a danger of personal injury or damage to the copier. Refer to Setting the Border Width on page 4-11. Press to display System Menu: 12. Completion of the Copying Procedure The finished copy will be ejected. The right is reserved to make changes in specifications and methods at any time without notice.
The time intervals that can be set are 1, 5, 15, 30, 45, 60, 90, 120, 180 and 240 minutes. The sections of this guide and parts of the copier marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the copier. About the International Energy Star Program International Energy Star Program has as its basic goals the promotion of efficient energy use and the reduction of the environmental pollution that accompanies energy consumption by promoting the manufacture and sale of products that fulfill program standards. Checking the Total Counter The Total Count can be viewed on the Operation Panel. Refer to EcoPrint on page 5-10 for instructions on how to select or deselect EcoPrint in the System Menu. Failure to completely remove remnants of torn pages can lead to paper misfeeds. Such locations may cause the copier to fall down or fall over.
Place the side to be copied so that it faces down. Text Exposure Adjustment Adjusts the median exposure value of the copy for the Text original. Refer to Selected Cassette on page 5-14. Dangerous sparks may cause burns. The paper sizes that can be used are Letter. After cleaning the Electrical Charge Section using the Grid Cleaner, wait more than 5 minutes before using the machine. Making 2-Sided copies from a 2-Sided original Front and Back side copies are Original Finished Product made in the same way as duplex.
All information in this manual is based on the latest product information at the time of publication. If the problem is not resolved after checking these items, contact your service representative. Doing so may cause pain in the eyes or eyestrain. The finished copy is bound at the top, and each page spread copied in the same direction. Custom Size 2 appear on the operation panel. Auto Sleep Setting Set whether or not to automatically enter Sleep Mode when copying is completed or after operations have been finished.
The value set in the System Menu will inherit the value that is set at the time when the copy is made. Stitch Width Menu for the Margin will be displayed. This type of situation presents a danger of fire or electrical shock should they fall inside. Close the left Close cover as displayed in place of. Refer to Copy Limit on page 5-19. Courier Typeface Used to denote messages or System menu will be displayed.
Cleaning the Original Cover Open the Original Cover and use a cloth dampened with alcohol or a dilute neutral detergent to clean the underside of the Original Cover. Originals left there may fall out when the Document Processor is opened. If the Duplex Unit option is installed, lift it up and remove the paper. If used together with 2-Sided Copy, 8 sheets of originals can be copied onto both sides of a single sheet. The paper sizes displayed are as given in the table below.
Even types of copies can be stored. Replace the Waste Toner Box at the same time you replace the Toner Container. After the Interrupt Copy has been produced, the copying operation resumes at the same settings in effect prior to the interruption. Ejection Extension Ejection Tray The original will be temporarily ejected when copies of both sides are made. Custom Size 2 in the System Menu and then perform the same settings.
Repeat this operation several times. Replace it with a new waste Replace waste toner box. Paper Feeder In addition to the cassettes provided with the copier, a Paper Feeder a 3-level device with a cassette that can hold 300 sheets can also be used. This indicates that the product is safe to use during normal operation and maintenance. Please observe the warnings to prevent accidents such as burns and electrical shock while clearing paper misfeeds and adding toner.